Installation Videos

High level over view of how to set up your new lighting gear

Connecting Power

How to chain power to your fixtures using PowerCon™

Connect DMX

How to connect DMX signal to your lights using the Pro Distro™

Set DMX Address

Assign a unique DMX address to your light fixtures.

Set Channel Mode

Setting the correct mode is an important step in the setup process.

Enttec Box Connection

Connect your Enttec™ Box (if using LightKey™)

Chaining Power

How to utilize power chain cables in your setup

Install Clamp

If hanging to truss or pipe, install a clamp

Safety Cable Install

Install the safety cable

Common Troubleshooting

Common issues that may occur during your installation process

No Control

Check these items if you are having issues controlling your fixture

No Control Continued

Check these additional items if you are having issues controlling your fixture

No Power

Fixture not powering? Check these items

Lights Flickering

If your lights are flickering, check these settings

Control Issues (LightKey)

Check these 3 most common settings in LightKey™ if you're not able to control your lights

Control Issues (Vista)

Check these 3 most common settings in Vista™ if you're not able to control your lights

View additional troubleshooting items

This will move you over to the troubleshooting section...

Fixture Setup​

Setup guides for each fixture type

Software Setup

Setup guides for your software control