Pixel Stix™

Set up your Pixel Stix™

You’ll find instructions and various resources below that will help you set up your Pixel Stix™ and Processor quickly.

OVERVIEW

Key steps for setting up PixelStix™...

Pixelstix™ can be set up in 4 different modes:
10 Channel Mode = identical color, fx and intensity for ALL units
55 Channel Mode = individual color, fx and intensity (RECOMMENDED DMX Mode)
480d Channel Mode = dual pixel level control (RECOMMENDED ARTNET Mode)
480s Channel Mode = single pixel level control

Step 1

Unbox your fixtures and parts.

Step 2

Set up your Pixel Stix™ by ground support, wall mounting or hanging them.

Step 3

Wire the Pixel Stix™ together using Cat6 cable to the processor.

Step 4

Patch the processor to your software to determine DMX address.

Step 5

Set up the processor in 10ch or 55ch over DMX or in 480ch mode over Art-net. For details on the various modes, please review the User Manual.

Step 6

Test your setup.

Fixture Profiles

downloadS

Pixel Stix™ User Manuals

Set up

How to wire your Pixel Stix™

CONFIGURATION INSTRUCTIONS FOR:

LightKey + Pixel Stix™

CONFIGURATION INSTRUCTIONS FOR:

Onyx + Pixel Stix™

CONFIGURATION INSTRUCTIONS FOR:

Vista PC + Pixel Stix™

CONFIGURATION INSTRUCTIONS FOR:

Vista Mac + Pixel Stix™

CONFIGURATION INSTRUCTIONS FOR:

MA2 + Pixel Stix™