Pro Distro™

Watch the setup video

In this short 3 minute video, you’ll learn the essentials needed to install your Wall Panel Pro™.

WALL PANEL PRO

Set Up Your Wall Panel Pro

FAQ

Ensure that your Wall Panel Pro Control mode is set to single. Single mode is ideal for most applications.

Make sure the Wall Panel Pro is in Wall Mode, then Press the “Wall” Button again until the lights turn solid.

Ensure that your Wall Panel Pro is powered on and set to Console, by pressing the “Console” button.

When selecting a different preset ensure that the panel is unlocked by holding the “wall” button until it starts flashing. Also verify that the preset you are selecting has data saved.