Pro Kick™

Watch the setup video

In this short 2 minute video, you’ll learn the essentials needed to utilize your Pro Kick™.


Key steps for setting up your fixture...

Step 1

Unbox your fixture and its parts. Included are the fixture, barn doors, power cord and short DMX cable.

Step 2

Attach the power cable by inserting the blue PowerCon™ connector into the fixture and twisting it to lock.

Step 3

Plug into power.

Step 4

Patch the fixture into your software or controller. (View patching example below)

Step 5

Set the DMX address using the menu + up/down buttons.

Step 6

Mount your fixture and connect DMX cable to your other fixtures, distributor or controller using the in/out DMX port.

Fixture Profiles


Software patching examples

Don't see your controller listed?
Simply follow the concepts outlined in the patching examples.
View your specific software or controller manual for related patching instructions.


Pro Kick™ User Manual


The Pro Kick has a static beam size. To shape your light, use the barn doors.

Rigging guides are available to PCL customers only. Please login to view detailed rigging guides.

Your software will dictate what DMX address you should set to your fixture. View the software patching examples on this page for more detail.

If colors seem off or missing, double check your DMX address to ensure it matches your software patching. For more info please review the troubleshooting area.

Check to make sure the PowerCon™ end is twisted and locked into the fixture. Check the fuse. Check the power cord and power source.

This is most likely caused by your DMX or Mode being set incorrectly. Please check your DMX addressing and mode settings.

Yes, simply use a power chain cable to connect power between fixtures. Up to 6 fixtures can be chained together.

PCL customers, please login to view software tutorials, training videos and courses.