Zoom Pro 7™

Watch the setup video

In this short 2 minute video, you’ll learn the essentials needed to utilize your Zoom Pro 7™.


Key steps for setting up your fixture...

Step 1

Unbox your fixture and its parts. Included are the fixture, power cord, short DMX cable and 2 quick-connect brackets.

Step 2

Attach the power cable by inserting the blue PowerCon™ connector into the fixture and twisting it to lock.

Step 3

Plug into power.

Step 4

Patch the fixture into your software or controller. (View patching example below)

Step 5

Set the DMX address and Mode using the menu + up/down buttons.

Step 6

Mount your fixture and connect DMX cable to your other fixtures, distributor or controller using the in/out DMX port.

Fixture Profiles


Software patching examples

Don't see your controller listed?
Simply follow the concepts outlined in the patching examples.
View your specific software or controller manual for related patching instructions.


Zoom Pro 7™ User Manual


If you’re hanging your fixture, you’ll need to utilize the 2 included quick connect brackets. Attach them to the bottom of the fixture and turn the locks TIGHTLY into place. Utilize a hand tool to ensure these FULLY LOCK into place before attaching clamps.

Rigging guides are available to PCL customers only. Please login to view detailed rigging guides.

Your software will dictate what DMX address you should set to your fixture. View the software patching examples on this page for more detail.

If you’d like to control each pixel individually, set the Zoom Pro 7 to 47 channel mode. Be sure to set this mode in your software controller as well.

Check to make sure the PowerCon™ end is twisted and locked into the fixture. Check the fuse. Check the power cord and power source.

This is most likely caused by your DMX or Mode being set incorrectly. Please check your DMX addressing and mode settings.

Yes, simply use a power chain cable to connect power between fixtures. Up to 4 fixtures can be chained together.

PCL customers, please login to view software tutorials, training videos and courses.